Lightweight and compact design
The Barrett PRC-2091 HF Tactical Mobile Package upgrades the PRC-2090 by providing a convenient rapid docking system and transmitter power amplification to 125 W PEP. With options for either 12 VDC or 24 VDC power supply and the flexibility of dismounted use of the PRC-2090 transceiver when not in the vehicle (additional accessories may be required), the PRC-2091 HF Tactical Mobile Package can be installed in a wide range of vehicle types with antenna options to suit.
The standard package comprises:
New software defined core
The new software defined core provides a much improved memory capacity and extends the life cycle and upgradability of the PRC-2090. The software based architecture enables the user to maintain their radio transceiver equipment with the latest transceiver software releases taking advantage of the latest product enhancements and features as they become available.
Detachable display
The display, complete with a fully featured advanced tactical handset remotes from the transceiver unit. This enables the operator to wear the display unit on their front webbing and have full operational access to the manpack without dismounting the manpack transceiver unit itself. For tactical base and mobile applications, the optional extended control interface allows the transceiver unit to be located at a convenient position away from the operator. This is ideal for command post operations or vehicle mounting where space is limited.
Intuitive operation
Barrett’s well known intuitive operator interface ensures the PRC-2090 is very simple to operate. Principal key functions are performed using a large six key cluster on the advanced tactical handset.The operator is guided by a large 128 x 64 LCD graphics display with adjustable backlighting ensuring the maintenance of night vision or high levels of luminescence in poor visibility. Network station addresses and telephone numbers are stored in easily accessible address and phone books and as little as two key strokes will initiate a call.
Other features:
Frequency range
1.6 MHz to 30 MHz Tx, 250 kHz to 30 MHz Rx*
Channel capacity
Up to 500 programmable channels
Operating modes
J3E (USB, LSB) – H2B (AM) – J2A (CW) – J2B (AFSK)
Frequency stability
±0.5 ppm (±0.3 ppm optional)
Sensitivity
-120 dBm (0.224 μV) for 10 dB SINAD – J3E Mode pre-amp on
Frequency hopping
5 or 25 hops per second
RF connections
Whip or long wire using internal automatic antenna tuner or 50 ohms connector
RF output power
30 W PEP, 10 W PEP (125 W PEP) when in vehicle or base docking station (voice duty cycle only)
Weight
2090 transceiver with 10 Ah Lithium Ion battery cartridge 5.22 kg
Key management and keyfill software (AES 256 and DES 56)
Mass matched vibration mounting platform for land application
Barrett 977 vehicle tracking system for 1- 50 mobiles.
2018 Mobile magnetic loop HF antenna. Ideal for NVIS propagation or applications requiring constant coverage for distances of 0-1000km, the loop antenna provides significantly more gain than conventional whip antenna systems.
Barrett 2019 MIL-SPEC ATU HF mobile antenna - NATO green
Stainless steel whip. Single section stainless steel whip for the Barrett 2019 automatic tuning mobile antenna for NVIS operation. Length 2080 mm
Adaptor plate to mount 2019 antenna. Mounting plate for mounting 2019 antenna on existing vehicle mounts with NATO 6 or 3 hole or USA 4 hole patterns.
Internal fit GPS receiver for 2019 antenna. GPS receiver fitted inside the 2019 antenna, interfaces to the 2090 docking station via the RF control cable supplied with 2019 antennas.
NVIS Whips
NVIS Magnetic base
NVIS Gutter mount bracket. Gutter mount bracket for NVIS whip.
Frequency hopping (export license required). 25 or 5 hops per second – no central synchronisation station, no net entry delay or late entry delay.
Secure Call. A point to point or point to multipoint Secure Call system initiated by the entry of a scramble key and the transmission of a Secure Call Selcall.
FED-STD 1045 / MIL-STD 188-141B Automatic link establishment (ALE).
CW key - lightweight tactical - with leg strap.
Headphones. Black lightweight tactical with MIL-STD 15 pin connector.
Advanced tactical handset
Display / handset extender interface
Display / handset extender cable 1.5 metres
Display / handset extender cable 15 metres
Voice encryption AES 256
Voice encryption DES 56.
Voice scrambler FFT. Enables the PRC-2090 to operate in FFT based voice scrambler mode.
GPS receiver / antenna module (ESU)
Waterproof speaker / microphone. Speaker / microphone for 2090 manpack with MIL-STD 15 pin connector.
Backpack for manpack - colour Multicam.
Programming kit. Microsoft Windows compatible (Windows XP or later) programming software package to suit all PRC-2090’s.
External speaker cable to 2090 VDS. Cable to connect the rugged external mount speaker to the VDS.
Rugged external mount speaker. External mount speaker for the PRC-2090 manpack transceiver when used in temporary field camps.
Key injection kit for voice encryption AES 256/ DES 56/ FFT
Speaker mounting bracket. Speaker bracket for mounting the rugged external speaker to the vehicle docking station.
Day Pack - colour Multicam.
Lightweight tactical headset (under helmet). Lightweight tactical headset, suited to under helmet mounting, with amphenol 15 pins connector, speaker, microphone and clip on Press-To-Talk (PTT) button. Colour black.
Rapid deployment wire dipole antenna - 125 W. Operates from 2 to 30 MHz – 125 W PEP max. Frequency markers attached to Kevlar radiators.
Rapid deployment broadband dipole antenna - 125 W. Operates from 2 to 30 MHz without adjustment – 125 W PEP max.
Rapid deployment mast. Portable 5 metres mast kit for tactical broadbands and dipoles – rapid deployment.
Tape whip - 1.5 metre. For manpack operation in receive mode. (for transmission from 5 to 30 MHz but at limited efficiency).
Long wire throw out antenna. For manpack operation with an adaptor to suit the whip stud on PRC-2090.
Collapsible whip 3 metres with gooseneck. For manpack operation with gooseneck – colour black.
Counterpoise earth kit - multi-wire
Counterpoise earth kit - single wire
912 Multi-wire broadband dipole (2 to 30 MHz) - 150 W PEP stainless steel
Rapid deployment wire dipole antenna - 125 W PEP. Operates from 2 to 30 MHz with frequency lables to indicate tuned length. Manufactured with Kevlar radiators and UV resistant Dacron cords.
10 metres air transportable aluminium mast - nylon guys
Whip adaptor to suit 2090. Complete whip adaptor to fit 2090 manpack.
Rapid deployment broadband dipole antenna - 125 W PEP
NVIS Kit for 912. To suit BC91200 multi-wire broadband dipole antenna.
Halyard and pulley kit suit 912 broadband antennas
Offset bracket and pulley. To facilitate mounting of 912 broadbands or 915 wire dipoles in an inverted “V” configuration on either 902 winch-up towers or 902 telescopic masts. Pulley to suit 4 mm halyard.
Antenna mounting bracket. Mounting bracket for mobile whip antenna.
Rapid deployment two wire broadband dipole antenna - 125 W PEP
Universal AC/DC adaptor. Universal AC/DC power adaptor – for charging and operating the manpack transceiver when either mains power between 100 to 254 VAC or DC power between 11 to18 VDC is available.
Rapid deployment hand crank generator. Hand crank generator – for charging and operating the manpack transceiver.
Battery pack 10 Ah. Battery cartridge suitable for PRC-2090 manpack. 14.4 V 10 Ah Lithium Ion – colour matt black.
Rapid deployment solar panel - colour Multicam. Solar power supply pack – for charging and operating the manpack transceiver.
MIL-STD internal modem with RC-50B 5066 stack based communications suite
Clover 2000 internal modem with internet and fax gateway software
Clover 2000 external modem with USB interface & internet & fax gateway software. Clover 2000 external modem powered by USB interface from connected ruggedised laptop (not included) running the communications suite software.
MIL-STD external modem with RC-66B based communications suite
Clover 2000 external modem mount. Allows mounting of modem to PRC-2090 VDS in various configurations.
Vehicle docking station. Increases the output of the PRC-2090 tactical transceiver, when docked to 125 W PEP (voice).
Handset mounting bracket. Bracket to mount handset to the vehicle docking station.
Removable display vehicle mounting bracket. Allows the user to mount the display unit separate from the transceiver.
Tactical installation kit
Lightning arrestor kit 400 W
Barrett 977 vehicle tracking system for 1-10 mobiles.
Barrett 977 vehicle tracking system for 1- 25 mobiles.
Barrett 977 vehicle tracking system for 1- 100 mobiles.
AC Power supply module - 13.8 VDC. AC mains power supply module 96-256 VAC universal input. With connections for optional back up battery.
24 V to 12 V converter module suit vehicle docking station. Provides for 24 V operation of the PRC-2090 when deployed in the vehicle docking station. The module attaches to fixture points on the top rear of the vehicle docking station.
Barrett 4011 MIL-SPEC ATU
Barrett 4011 MIL-SPEC ATU with mobile whip and base package
Anti-Vibration mount for 4011. For mounting a Barrett 4011 MIL-SPEC ATU into an armoured or other shock heavy vehicle.
4017 Tactical HF ATU base antenna
Secure digital voice Low rate auto vocoder 600/1200/2400 with AES 256 encryption
Secure digital voice auto vocoder 700/1200/2400 with DES 56 encryption