Home HF-SSB Commercial ICOM Icom  |   IC-718 HF All Band Transceiver

IC-718 HF All Band Transceiver

The origin of the HF transceiver

The HF bands allow you to communicate over long distances covering many km even to the other side of the world. With the superior performance found in the IC-718 such as wide dvnamic range, high C/N ratio, and full duty operation you will find making these contacts easy.

Experience the combination of the latest RF and digital technology, along with the size and simplified operation. You will see the IC-718 will be the most practical rig you will ever own.

Features

 Front mounted loud speaker
The IC-718 has a speaker mounted on the front panel. With the speaker facing the operator, audio sounds can be clearly heard without impediment during operation. It is no longer necessary to manually increase the volume to try and capture audio sounds

Superior basic performance
The IC-718 has 0.03-29.999999 MHz* general coverage receive capability. A 4-element system is employed for the 1st receive mixer, providing superior receive IMD, especially from in-band near-by interfering signals. A well-designed double-conversion system to help minimize image and spurious responses for better signal fidelity, is also built-in. A newly designed PLL circuit has been adopted to improve C/N ratio characteristics. The combination of the 4-element system mixer and new PLL circuit allows superior basic performance as that of a commercial grade transceiver. (*Guaranteed range: 0.5-29.999999 MHz)

Interference rejection - IF shift
To reject interference, the IC-718 has an IF shift function which shifts the center frequency of the IF passband electronically to reduce adjacent interference.

Microphone compressor
This feature compresses microphone audio input to increase average audio output level. The result is, that talk power is increased. The compression level is adjustable for your preference. This function is effective for long distance communication, or when propagation conditions are poor.

RF gain control
RF gain control is combined with the squelch control. The RF gain adjusts minimum response receiver gain, and ignores signals weaker than the pre-set level - providing pleasant stand-by, or scanning.

Other features

  • USB, LSB, CW, RTTY(FSK) and AM modes are built-in
  • Level adjustable noise blanker
  • RF attenuator and Pre-amplifier
  • Variety of scanning function types
  • Total 101 memory channels are available
  • Hand microphone is supplied, and more...

General

Frequency range
Rx  0.030-29.999999 MHz*1
Tx  1.800-1.999999 MHz*2; 3.500-3.999999 MHz*2 (varies with version); 7.000-7.300000 MHz; 10.100-10.150000 MHz; 14.000-14.350000 MHz; 18.068-18.168000 MHz; 21.000-21.450000 MHz;  24.890-24.990000 MHz; 28.000-29.700000 MHz. (*1guaranteed range: 0.5-29.999999 MHz; *2varies according to version)

Mode
USB, LSB, CW, RTTY (FSK), AM

No. of memory channels
101 (99 regular, 2 scan edges)

Frequency resolution
1 Hz

Frequency stability
Less than ±200 Hz from 1 minute to 60 minutes after power on. After that rate of stability less than ±30 Hz/hr. at +25°C (+77°F). Temperature fluctuations 0°C to +50°C (+32°F to +122°F) less than ±350 Hz

Power supply requirement
13.8 V DC ±15% (negative ground)

Physical characteristics

Dimensions (projections not included)

240mm (W) x 95mm (H) x 239mm (D)
97/16in (W) x 33/4in (H) x 913/32in (D)

Weight
3.8 kg; 8 lb 6 oz

User environment

Usable temperature range
-10°C to +60°C
(+14°F to +140°F)

Filter

Accessories

AH-2B Antennas

Antenna element/base (7-54MHz)

AH-710 Antennas

Folded dipole (1.9-30MHz)

AH-740 Antennas

Automatic tuning antenna (2.5-30MHz)

MB-118 Mounting Hardware

Mobile mounting bracket

MB-23 Mounting Hardware

Carrying handle

OPC-2321 Cables

Control cable for AH-740 (6m)

OPC-2361 Cables

DC power cord 25A fuse

OPC-599 Cables

Cable adapter converts 13-pin to 7/8-pin connectors

PW1 Amplifiers

1KW linear amp

Related products

ICOM Amateur HF

ICOM Amateur HF Solutions 

ICOM Marine HF

High quality marine radio transceivers from ICOM