IC-7200 HF/50MHz Transceiver

Simple and tough with IF DSP

IF DSP
While the IC-7200 is an entry-class transceiver, advanced digital features are comparable to higher class transceivers.

AGC loop management
Distortion and blocking from strong nearby signals are prevented by placing DSP functions inside the AGC loop. The AGC time constants are selectable from fast, slow and off for each operating mode.

Digital IF filter
passband width rangeOptional filters will never be required for the IC-7200. The built-in digital filter allows you to flexibly select the filter width and shape from soft and sharp.*
*Filter shape is selectable for SSB and CW modes only.

Manual notch filter
The manual notch filter delivers more than 70dB of attenuation. Strong interring tones will be eliminated without adversely affecting the AGC loop performance. On the bottom right of the front panel, a dedicated control knob adjusts the notch filter frequency.

Digital twin PBT
Tailor your IF passband with the Twin PBT by electronically shifting the upper and lower edges of the IF filter. Depending on the use of the concentric knobs, you can either narrow the IF passband, or shift the entire passband to eliminate interfering signals.

Digital noise reduction
The digital noise reduction reduces background noise and improves the signal-to-noise ratio. The noise reduction level is adjustable in 16 steps. It improves the readability of voice and data signals.

Digital blanker
The noise blanker reduces pulse-type noise such as engine ignition and sparking. The NB level and width (blanking duration) are adjustable in 100 steps.

Other features

• RIT
• VOX
• 0.5ppm frequency stability
• 201 memory channels
• Built-in 20dB attenuator
• Auto TS function
• 1Hz step tuning
• Band stacking register
• Built-in voice synthesizer
• Quick split
• Quick set mode
• CW mode operation
• RF speech compressor

Output power
100W (25W AM)

RX frequencies
0.030-60.00

Mode
USB, LSB, CW, RTTY (FSK), AM

Number of channels
201 Ch. (199 regular, 2 scan edges)

Antenna connector
SO-239 (50Ω)

Power supply requirement
13.8V DC ±15% (negative ground)

Dimensions (projections not included)
241 (W) × 84 (H) × 281 (D) mm
9 1⁄2 x 3 5⁄16 x 11 1⁄16 in.

Weight (approx.)
5.5kg; 12.1 lb

Operating temperature range
-10°C to +60°C; +14°F to +140°F

Frequency stability
Less than ±0.5ppm