ePMP 3000L Fixed Wireless Access Point

2X2 MIMO Support with Peak Throughput of 600 Mbps

MicroPOP applications
ePMP 3000L is ideally suited for areas with low density or small numbers of subscribers. With support for narrow-band sectors and omnis, coverage can be added exactly where needed.

Frequency reuse
Supports GPS synchronization and SM Transmit power control to allow for frequency re-use.

Unmatched performance and scalability
With the efficient Cambium Networks MAC protocol and advanced air-fairness scheduler the ePMP 3000L supports high performance and low consistent latency to subscribers.

Key specifications

• 2X2 MIMO support with peak throughput of 600 Mbps
• 256QAM-5/6, 80 MHz support
• Supports a wide frequency range: 4910 to 5950 MHz
• Frequency re-use with GPS sync and interference mitigation
• Connectorized for use with sector antenna. Also compatible with RF Elements Twistport(tm) Adaptor for ePMP
• Cloud or on-premises network management with cnMaestro

Channel spacing
Configurable on 5 MHz increments

Frequency range
4910 - 5970 MHz (exact frequencies as allowed by local regulations)

Channel width
20 | 40 | 80 MHz

MAC (Media Access Control) layer
Cambium Proprietary

Physical layer
2X2 MIMO/OFDM

ARQ
Yes

Nominal receive sensitivity (w/FEC) @20 MHz channel
MCS0 = -89 dBm to MCS8 (256 QAM-3/4) = -66 dBm (per chain)

Nominal seceive sensitivity (w/FEC) @40 MHz channel
MCS0 = -87 dBm to MCS9 (256QAM-5/6) = -64 dBm (per chain)

Nominal receive sensitivity (w/FEC) @80 MHz channel
MCS0 = -84 dBm to MCS9 (256QAM-5/6) = -59 dBm (per chain)