cnPilot r190 Series Home Router

Cloud Managed Residential Access Point

100Mbps NAT/NAPT speed
​2T2R 2.4GHz IEEE 802.11 b/g/n(300 Mbps)

VoIP SoC
MIPS Single-core 580MHz

Flash
16MBytes Flash

RAM and CPU
64MBytes DDR3 RAM • MT7628N

Firmware Upgrade
Web Management Interface
Local and Remote Syslog (RFC3164)
Auto Provisioning
SNTP Time Synchronization
Multi User Level
SNMP v2
Telnet
TR069
System Log: local log and remote log

Power Supply
AC/DC Adapter • AC Input: 100~240V, 50~60Hz • DC Output: 12V, 1.0A

I/O Interfaces
1 RJ-45 for WAN port (Ethernet 100 Base-T) • 4 RJ-45 for LAN port (Ethernet 100 Base-T)

DHCP/PPPoE
HTTP Server for Web Management
TFTP/HTTP for Auto Provisioning
DHCP Option Codes for SIP (RFC3361)
DNS/DNS SRV (RFC1706 and RFC 2782)
IEEE802.1Q VLAN/802.1p and IP DSCP
SNTP

4 SSID
Static WEP(64/128bit)
Dynamic WEP(64/128bit)
AES/TKIP
MAC certification
WEP certification
WPA/WPA2
AP Isolation and MBSSID AP Isolation
WMM
WDS
WPS
MAC Filter(different from wired MAC Filter)

Support NAT mode and Bridge mode
Support DDNS
MAC address cloning
Built-in Wired speed NAT Router
DHCP Server and Client
IP conflict detection
Port Forwarding, DMZ, SuperDMZ
802.1Q VLAN/802.1p, DSCP, Rate Limiting
VPN (PPTP,L2TP, IPSec) Passthrough
SNTP
IGMPv2
Firewall (SYN Flooding, IP Spoofing, Smurf Attack, Ping of Death, DoS)

Operation Temperature: -5~45 Degree C
Storage Temperature: -25~ 85 Degree C
​Relative Humidity: 10%~90% No Condensing