SRG3900 TETRA Mobile Radio
Most successful TETRA gateway
Its extensive range of control console solutions, audio accessories and install options means it can be found in the world’s police, fire and ambulance vehicles; in motorcycles, trains, mining vehicles, helicopters, patrol boats and exposed rigid inflatable boats, as well as, in mobile control/incident response vehicles and in emergency control rooms.
With a class-leading 10 Watts of RF power, and the most proven gateway and repeater technology on the market, the SRG3900 TETRA mobile extends communication into areas otherwise beyond network coverage.
Functions
DMO gateway
The SRG3900 pioneered DMO-gateway and is the world’s most widely deployed TETRA range extension solution. The SRG3900 is used to bridge TMO with DMO coverage in blind spots such as buildings and tunnels.
DMO repeater
Use as a DMO-repeater to increase DMO coverage. The SRG3900 is used to bridge two DMO radio users.
Secure
Designed for mission critical use, the SRG3900 supports ETSI and SFPG recommended Air Interface Encryption and End to End Encryption.
Wide range of accessories
Wide range of accessories for audio, power, control and installation.
Sunlight-visible display
Dual illumination technology ensures clarity under all light conditions (with Sepura colour consoles).
Advanced safety features
Protection and reassurance for lone or remote workers.
Advanced positioning capability
Highly sensitive GNSS positioning, including compatibility with GPS and Glonass.
Clear audio
Advanced noise processing and a large loudspeaker deliver outstanding audio, even in loud environments.
Apps capability
Connection with external devices such as Bluetooth connected printers, barcode readers and RFID scanners through SDA and WAP. SDA enables a Sepura radio user to send and receive data in a user friendly form-based environment.
Features
- DMO repeater
- DMO gateway
- Virtual console
- Audio line in & line out
- Soft key function via PEI
- Callout
- Picture message push
- Premium application pack (SDA)
- Profile by talkgroup
- Network selection by talkgroup
- DMO/TMO selection by talkgroup
- Reset to default status
- Extended preferred & fixed LA list
- Dynamic home screen
- Set DMO power from MMI
- Air interface migration
- End-to-end encryption
- Lone worker
- Packet data
- WAP
- Position report buffer
Accessories
Fist Microphone for Colour Console (IP67 - LTW Connector) Audio Accessories
Half-duplex accessory, terminated with an LTW connector. Fitted to the back of the colour console to keep it IP67 rated for use within marine environments.
HBC Interface Box Installation
The handset-based console interface boxes connects the handset-based console to the SRG3900 and attaches to the HBC cradle.
IP67 Sepura Colour Console 2 Control
Delivers an enhanced audio and visual experience, increasing the flexibility and installation options of the radio.
IP67 Sepura Colour Console 3 Control
Delivers an enhanced audio and visual experience, increasing the flexibility and installation options of the radio. Perfect for vehicles exposed to dust or rain.
Sepura Colour Console Control
Delivers an enhanced audio and visual experience, increasing the flexibility and installation options of the radio.
Sepura Colour Console 3 Control
Delivers an enhanced audio and visual experience, increasing the flexibility and installation options of the radio.
Speaker Microphone for SCC (VAC) Audio Accessories
The speaker microphone is a half-duplex accessory with built-in speaker and is supplied with a mounting bracket with magnetic off-hook detection.
SRG 24VDC/12VDC Converter Power
24v to 12v converter used to provide power the SRG3900 when installed into vehicles with 24VDC electrical systems.
SRG AIU Restricted Access Mounting Kit Installation
This kit contains four screws with over-sized heads to enable hand tightening when the AIU is installed in an area with restricted access.
SRG AMPS Attachments Installation
An AMPS-ready backplate, for use when attaching the Sepura Colour Console with the AMPS fitting kit or universal AMPS fitting kit.
SRG AMPS Fitting Kit Installation
This kit provides an adjustable AMPS bracket for the Sepura Colour Console.
SRG Antennas Antennas
The TETRA antennas connect to the BNC connector at the rear of the SRG3000 Series radio.
SRG Application Interface unit MK2 Installation
The application interface unit performs all the audio, PEI and digital I/O access functions of the console. With no display or keypad and light.
SRG Console Dash-Mount Kit Installation
Ideal if the console viewing angle needs to be optimised, this kit consists of a console pivot bracket, tilt assembly, fixed bracket and screws.
SRG Console Interface Box Installation
The console interface box is used to position the 15-way high-density D-type data connector away from the console.
SRG Dedicated Data Cable Programming
The dedicated data cable is used to provide a data connection to the Sepura Colour Console (SCC) without removing the VAC audio accessory.
SRG Desk-Mount Unit Installation
The desk-mount unit (DMU) is designed to provide an integrated SRG desktop solution, ideal for an office or control room environment.
SRG DIN Fitting Kit Installation
The DIN fitting kit enables DIN-A flush mount installation of the Sepura Colour Console (SCC) into the dash of a vehicle.
SRG Emergency Button Installation
The SRG emergency button is a rugged panel mounted push button. The unit has a round red button to aid identification when installed in a vehicle.
SRG Fist Microphone Audio Accessories
The fist microphone connects to the rear of the console or AIU using a 10-way Hirose connector. It is a half-duplex accessory and must be used with a loudspeaker.
SRG Hands-Free Kit (AIU) Audio Accessories
Features a remote microphone and a remote PTT button with a programmable soft key. The microphone and switch leads are terminated with 3.5mm jack, connecting to the plugs on the side of the AIU.
SRG Hands-Free Kit (Console) Audio Accessories
This kit provides a remote microphone and a remote PTT button with a programmable soft key, and connects to the rear of the console or AIU using a 10-way Hirose connector.
SRG Handset Audio Accessories
Full-duplex accessory that allows calls to be taken in private without using the loudspeaker. An integrated PTT button means that the handset can also be used for half-duplex calls.
SRG Handset-Based Console 2 Control
With ergonomic design and outstanding audio, the HBC2 combines the functionality of a traditional radio console with a telephone handset.
SRG Handset-Based Console 3 Control
Clear and user-friendly, the console boasts a unique shortcut/notification bar to alert users to missed calls or messages, as well as major changes in the radio's operational state.
SRG Handset-Based Console Cradle Installation
For attaching the handset-based console into a vehicle, this cradle is AMPS-compliant, for use with commercially-available brackets, arms and goosenecks.
SRG Heavy-Duty Footswitch Installation
This large area footswitch is ideal for vehicle 'foot well' installations. Two end connector types are available, Hirose or 3.5mm jack. Both meet IP55.
SRG Heavy-Duty Gooseneck Microphone Audio Accessories
This is an omnidirectional, low impedance dynamic microphone fitted to a fully flexible gooseneck making it ideal for heavy duty vehicle use.
SRG Low-Profile Loudspeaker Audio Accessories
Ideal for car installations, the speaker has a 1m lead and is terminated with a two-pole connector. A 5m extension cable is available if required.
SRG Motorcycle Kit Installation
We can provide a flexible solution that allows you to tailor your installations to specific bikes or for specific roles.
SRG Panic Switch Installation
Two part assembly: physical button can be fitted to a console panel with the activator fitted directly behind it.The installer will need to fabricate cables.
SRG Power Lead Assembly Power
This 5m, 12VDC power supply cable is supplied with in-line fuses.
SRG Remote Console Cable Installation
The remote console cable is used to connect the Console, AIU or HBC to either of the 'HD 15 way D-Type' interface connectors at the rear of the transceiver.
SRG Remote SIM Reader Miscellaneous
Ideal for third-party smart-card-based E2EE solutions. Conveniently located, the solution allows the user to easily manage the crypto security of the vehicle radio by the presence of the SIM card.
SRG Serial Data/Programming Cable Programming
Used for connecting the radio to a PC for configuration or PEI control.
SRG Speaker Handset (VAC) Audio Accessories
Full-duplex accessory that allows calls to be taken in private, without using the loudspeaker. The integrated PTT button means that the handset can also be used for half-duplex calls.
SRG Transceiver Plate-Mount Kit Installation
The mounting plate, supplied with all transceivers, can also be ordered separately. Includes fixing screws.
SRG Transport Loudspeaker Audio Accessories
This heavy duty loudspeaker has been specifically designed for use in larger enclosures normally associated with the driver cabins of buses or coaches.
SRG Universal AMPS Fitting Kit Installation
This kit provides a fully adjustable AMPS bracket for the Sepura Colour Console and Handset Based Console, consisting of a three-part ball and socket arrangement.
SRG USB Data/Programming Cable Programming
Used for connecting the radio to a PC for configuration or PEI control, with a USB interface. For data-specific applications, use the alternative data cable.
SRG USB VAC Data Cable Programming
Connects to the VAC connector on the front of the Sepura Colour Console and provides a USB connection between the radio and a PC for configuration or PEI control.
Virtual Console Installation
Allowing complete control of a Sepura TETRA mobile or gateway from a Windows-based or in-vehicle mobile data terminal, the Virtual Console saves valuable dashboard space.
Related products
SCG22 TETRA Mobile Radio
A world-class TETRA gateway paired with Bluetooth and Wi-Fi
About AIR
Products
Solutions
