IC-7610 HF/50MHz All Mode Transceiver

The SDR you have asked for

RF direct sampling system
The IC-7610 employs an RF direct sampling system, where RF signals directly convert to digital data and then processed by the FPGA (Field-Programmable Gate Array). This process reduces distortion that naturally occurs in the various mixer stages found in traditional superhetrodyne receivers. The RF direct sampling system in the IC-7610 is capable of 110 dB* RMDR. This performance gives you the ability to pull weak signals out of the noise of strong adjacent signals. There is a difference you can actually hear as the desired signal comes out of the pileup!
* Representative value at 2 kHz frequency separation (Received frequency: 14.2 MHz, Mode: CW, IF BW: 500 Hz)

Independent dual receiver
Whether listening to both sides of DX station running split, or looking for a multiplier on a different band or mode, the dual receivers in the IC-7610 have you covered. Two separate DIGI-SEL preselectors, two separate Band Pass Filter networks, feed two separate A/D converters into the FPGA.

Large color touch screen
The large 7" color TFT touch LCD offers intuitive operation of functions, settings, and various operational visual aids such as dual spectrum scope aligned vertically or horizontally, simulated analog meters and RTTY, PSK31/63 mode decoded messages. The combination of the touch screen and the multi-dial knob offers quick and smooth operation. When you push the multi-dial knob, menu items are shown on the right side of the display. You can select an item by touching the screen and can adjust the levels by turning the multi-dial knob.

Additional features

• Built-in automatic antenna tuner
• Digital-Up-Conversion (DUC) for clean transmit
• Dual receivers, dual spectrum scopes
• DVI-D connector for an external display
• SD memory card slot for saving data
• I/Q signal output
• Memo pad stores up to 10 operating frequencies and modes
• Quick split function
• Quick Dualwatch function
• RF gain and squelch control with a knob
• RIT and ΔTX variable up to 9.999 kHz
• UTC/local clock and timer function
• 1 Hz pitch tuning and display
• Dial lock function
• Adjustable main dial brake
• External speaker jacks for Main and Sub receivers
• Screen saver function
• Multi-function meter (S-meter, Power, ALC, COMP, SWR, ID, VD and TEMP)
• Auto tuning step function

Output power
100W (25W AM)

RX frequencies
0.030-60.00MHz

Receiver type
Direct sampling

Mode
USB, LSB, CW, RTTY, PSK31/63, AM, FM

Number of channels
101 (99 regular, 2 scan edges)

Antenna connectors
SO-239 × 2 (50 Ω unbalanced (Tuner off))
BNC × 1 (RX antenna In/Out)

Power supply requirement
13.8 V DC ±15%

Dimensions (W×H×D) (projections not included)
340 × 118 × 277 mm
13.4 × 4.6 × 10.9 in

Weight (approx.)
8.5 kg; 18.7 lb

Operating temperature range
0°C to +50°C; +32°F to +122°F

Frequency stability
Less than ±0.5ppm
(0°C to +50°C, after warm up)