PMP 450 - 2.4 GHz Access Point
Connectorized Fixed Wireless Access Point
The PMP 450 platform includes a variety of 2×2 MIMO APs ideal for applications where the scalability of the 450m (cnMedusa) is not required. Built upon advanced FPGA & SoC architecture, PMP 450 APs utilize Cambium Networks’ proprietary MAC / scheduling algorithm to enable highly efficient use of limited spectrum and maximum bandwidth allocation, supporting large numbers of subscribers per sector with minimal latency. Frequency re-use via GPS synchronization allows for efficient spectrum re-use throughout the network. PMP 450 APs, and the PMP 450 platform in general, offer a vast feature set including extensive L2 management capabilities, highly configurable channel width & spacing, and a host of other parameters.
Available in 2.4 GHz the PMP 450 Access Point (AP) delivers consistent and exceptionally high throughput – more than 200 Mbps per sector and more than 1 Gbps per tower.
Features
The 2.4 GHz Access Point Antenna offers an ideal array of features - spectral efficiency, higher gain than other solutions, a capability to overcome environmental challenges and improved signal strength. This antenna provides 2.4 GHz multi-band flexibility.
2x2 Multiple Input and Multiple Output (MIMO) gives 2.4 GHz Access Point Antennas the benefits of dual stream operation for most channel conditions, provides interference mitigation by selecting the best signal quality and allows for successful deployment of wireless networks in difficult environments.
High gain directional solution used by 2.4 GHz Access Point Antennas effectively focuses the main 18 dBi lobe while minimizing side-lobe leakage. This targeted transmission increases capacity over other types of antennas and decreases the interference from adjacent sources, while assuring the best signal quality for customers.
2.4 GHz Access Point Antennas are outdoor-rated. Cambium Networks perform rigorous set of environmental tests. We validate and guarantee the specifications and ensure their consistency with real life conditions.
Performance characteristics
SUBSCRIBERS PER SECTOR: UP TO 238
ARQ: Yes
MAXIMUM DEPLOYMENT RANGE: Up to 40 miles
Spectrum
FREQUENCY RANGE: 2400 - 2483.5 MHz
CHANNEL WIDTH: 5 MHz, 10 MHz, 15 MHz, 20 MHz, 30 MHz or 40 MHz
CHANNEL SPACING: Selectable on 2.5 MHz increments
Interface
PHYSICAL LAYER: 2x2 MIMO OFDM
ETHERNET INTERFACE: 10/100/1000BaseT, half/full duplex, rate auto negotiated (802.3 compliant)
PROTOCOLS USED: IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP
NETWORK MANAGEMENT: HTTP, HTTPS, Telnet, FTP, SNMP v3 (add line between this & v LAN)
LINK BUDGET
ANTENNA BEAM WIDTH: 2.4 GHz - 60° Sector (Dual Slant) 3 GHz - 90° Sector (Dual Slant)
TRANSMIT POWER RANGE: -30 TO +22 dBm (combined, to EIRP limit by region) (1 dB interval) (+25 dBm FOR 3 GHz)
Encryption
ENCRYPTION: 56-bit DES, FIPS-197 128-bit AES
Physical
ENVIRONMENTAL: IP67, IP66
TEMPERATURE: -40°C TO +60°C (-40°F TO +140°F), 0-95% non-condensing
WEIGHT: 2.5 kg (5.5 lbs)
DIMENSIONS (HxWxD): 27 x 21 x 7 cm (10.6” x 8.3” x 2.8”)
Related products
cnVision CCTV Series
Purpose-built Wireless Transport for Video Surveillance / CCTV
ePMP Platform
High Performance, Scalability and Reliability
PMP 450 Platform
Ultra-high performance and cost-effective fixed wireless broadband connectivity platform
About AIR
Products
Solutions
