Unlimited Mobility. Uncompromising Performance.
With 4 RF bands and multi-mode system access, the APX 8000 knows no limits when it comes to interoperability. Whether it’s loud or windy, whether you whisper or yell, the Adaptive Audio Engine and ultra-loud speaker bring clarity into every conversation.
With Wi-Fi access, the APX 8000 can quickly receive new codeplugs, firmware and software features in order to redeploy the radio fleet with ease as users keep talking without interruption. Intuitively designed with a familiar look and feel, the compact APX 8000 is always comfortable to use, from your grip to your holster.
All-band operation
Adaptive audio engine
Fit for the mission
Integrated wi-fi and data connectivity
Ruggedness
Security
Battery life - standard (based on a 05 05 90 duty cycle)
12 hours using standard battery
Standard battery chemistry type
Lithium Ion
Frequency band
VHF, UHF, UHF-1, UHF-2, 700 MHz, 800 MHz
Frequency bands
700/800 (764-776, 794-806, 806-824, 851-870 MHz); VHF (136-174 MHz); UHF Range 1 (380-470 MHz); UHF Range 2 (450-520 MHz)
Encryption
Yes
Power
700: 1-2.5 Watts; 800: 1-3 Watts; VHF: 1-6 Watts; UHF Range 1: 1-5 Watts; UHF Range 2: 1-5 Watts
Channel spacing
12.5, 20 kHz, 25
Encryption type Algorithms
Advanced Digital Privacy (ADP), AES, DES, DES-XL, DES-OFB, DVP-XL
Wi-Fi Security
WPA2, WPA and WEP
Dimensions H x W x D (without standard battery)
5.47 in. x 2.98 in. x 1.58 in.
Weight (without standard battery)
11.25 oz.
Display
Yes, Top (Model 1.5) or Front Display (Model 2.5 and 3.5), Alphanumeric, Numeric, Color
Keypad
No - Model 1.5, Limited - Model 2.5, Full DTMF Keypad - Model 3.5
Emergency button
Yes
GPS capable
Yes
Memory channel
Yes
Text messaging capable
Yes
Voice message
Yes
Mission Critical Wireless Bluetooth
Yes
Wi-Fi
Yes
Adaptive Audio Engine
Yes
Over-the-air Programming
Yes
Lone Worker
No
Multi-slot Packet Data
No
Time Out Timer
No
Transmit Interrupt
No
System Type
Analog/Digital; 3600/9600; Smartzone/P25; Conventional/Trunked
Mil spec
810 C, 810 D, 810 E, 810 F, 810 G
IP Standards
IP68
Intrinsically safe
No
This strap is designed for use with the universal chest pack.
1.75-inch leather belt is designed for use with carry cases or clips.
This fireman's radios strap allows you to securely slide the XE RSM into it.
Boston leather fireman's radio strap (XL)
Earpiece with microphone and Push-to-Talk combined (2-Wire), black
IMPRES Battery Management Entitlement Key enables fleet management on up to 20 different PCs.
This Universal Chest Pack holds and protects the radio.
GPS, 700/800 MHz (764-870 MHz), combination whip antenna.
GPS, UHF (700-800MHz), combination stubby antenna.
700/800 (764-870 MHz), single band stubby antenna.
This unique dual-unit charger allows simultaneous charging of two APX Series Radios or batteries.
IMPRES Vehicular Charger designed to charge your APX Series Radios on the go.
IMPRES Multi-unit Charger Inserts enable APX batteries to be charged in an XTS IMPRES multi-unit charger.
IMPRES Single-unit Charger Inserts enable APX batteries to be charged in an XTS IMPRES single-unit charger.
Headset a single cable, extension of 29 cm, black.
This remote speaker microphone clip button allows users to slide their XE Series RSM into a Boston Leather Strap.
Connect to your radio with Bluetooth® technology with this Mission Critical Wireless Earpiece with 12-inch cable.
The wireless capsule with a "push-to-talk" mission-critical function is a fast, flexible and secure way to connect continuously and wirelessly with any headset connected to your radio.
UHF, GPS (380-520 MHz), combination whip antenna.
GPS, VHF (136-174MHz) and UHF (380-520 MHz) dual band antenna.
IMPRES Temple Transducer with in-line push-to-talk and boom microphone. Designed for APX and MOTOTRBO radios.
These carry cases are available with fixed or swivel belt loops and are designed for APX 6000 Series Radios.
IMPRES 2-wire surveillance kit features adaptive audio and easy accessible microphone and push-to-talk combined.
IMPRES 2-wire black surveillance kit
This Wireless Remote Speaker Microphone (RSM) vehicular charger allows you to communicate with your radio while charging your battery simultaneously. Charge a spare battery by itself or charge the Wireless RSM with the battery attached. It comes with a button on the back that allows you to install the charger via hangup clip, similar to the mobile microphone.
Receive and transmit audio with this Boomless Temple Transducer, designed to fit under helmets and other gear.
Enhance your tactical audio solution with this large, easy-to-access push-to-talk button.
This lightweight carry case feature a swivel belt loop and is designed for APX Series Radios.
This interface module completes your tactical solution and operates in push-to-talk mode only.
The Tactical Ear Microphone is ideal for users requiring an unobscured face while working.
IMPRES IP68 RSM with audio jack and windporting
Retrofit your IMPRES Multi-Unit Charger with individual IMPRES Display Modules, designed to provide detailed information on the life and charge status of your battery.
Compact and lightweight, this APX Series Travel Charger is a simple plug-and-play solution that allows you to communicate while your radio is charging.
Conveniently organize and store covert accessories with this Pack-n-Go Carry Case.
Long Fireman's radio strap (56") with buckle.
This 60-inch radio strap is for use with carry cases and allows you to carry your radio cross-body.
This anti-sway strap is designed for us with radio straps to keep your radio securely in place.
The Covert Pack-n-Go Kit includes mission critical wireless accessories. Conveniently organize and store your covert accessories with the carry case.
This state-of-art XBT Headband Style Headset connects to your radio via Bluetooth® technology and protects your hearing.
This Enhanced Covert Pack-n-Go Kit includes essential mission critical accessories for all your covert operations.
Small/Med/Large hearing protectors (sonic defenders) ultra earplugs for use with any surveillance kit or heavy duty headset.
Communicate up to 100 meters away from your vehicle with this remote speaker microphone.
This APX Remote Speaker Microphone (RSM) features enhanced security, quick pairing and fast push-to-talk capabilities.
MT™ Series hard hat headset with Nexus connector, requires the Nexus adapter. Designed for APX and MOTOTRBO radios.
TacticalPro™ Series headband style headset with Nexus connector. Designed for APX and MOTOTRBO radios.
TacticalPro Series Hard Hat Attached with Nexus connector.
Adjustable lightweight, headband-style headset. Designed for APX and MOTOTRBO radios.
Receive and transmit audio with bone conduction technology with the rugged temple transducer, ideal for tactical environments. Designed for APX display remote speaker microphones.
Receive-only headband headset with 3.5mm non-threaded connector, designed for use with APX and MOTOTRBO remote speaker microphones.